REMOVING AND REPLACING THE BOBBIN
WINDING THE BOBBIN THREAD
Raise thread take-up lever to its highest position and open
1. Hold the balance wheel with your left hand, and turn
the slide plate:
stop motion screw toward you. (Fig. 1)
*
REMOVING THE BOBBIN
(continued)
Remove bobbin case by holding the latch open. Then
release latch and turn bobbin case downward. The bobbin
will not drop out while holding the latch open.
*
REPLACING THE BOBBIN
Hold the bobbin case by the latch and place it into the
shuttle.
Fig. 1
9