To Clean Shuttle Race - Janome New Home 580 Manual Of Instruction

TO CLEAN SHUTTLE RACE
Unplug the machine from the power supply.
TO REMOVE SHUTTLE:
Raise needle to its highest position and remove bobbin case. Turn levers away
from shuttle and lift out retaining ring and shuttle, by grasping center pin.
Clean the reverse side of feed dog with a small brush. Remove lint and thread
lever
lever
from all parts of shuttle and wipe with a lightly oiled cloth.
TO REASSEMBLE:o
Hold shuttle by center pin and fit carefully back into shuttle race, forming perfect
circle with shuttle driver.
shuttle
j
retaining rg
Replace retaining ring polished side out, making sure
the bottom pin fits into
notch. Lock retaining ring by turning levers back into position. Refit bobbin case
with bobbin
bobbin
bobbin case
30