To Regulate Thread Tensions - Janome New Home 580 Manual Of Instruction

TO REGULATE THREAD TENSIONS
Correct tensions are important for the good appearances of the stitches. If the tensions are not correct, the
results will be
imperfect stitching. Generally, the tensions should be adjusted by the upper thread tension regulator dial. However,
to test the
bobbin thread tension, hold bobbin case in your left hand and pull out a few inches of thread, if you feel a slight
pull and the
thread is supplied smoothly, it is usually unnecessary to adjust the bobbin thread tension.
0
CORRECT TENSION
X
INCORRECT TENSION
TO REGULATE BOBBIN
THREAD TENSION
When correct tensions cannot be obtained
by adjusting thread tension regulator or
"iupper
thread
when the fabric will need a special bobbin
correct tensions
thread tension, adjust the bobbin thread
--
fabric
Strengthen
4
tension
as shown below:
upper
tension
lower thread
Strnthe,
bobbin
thiread
bobbin thread
Weaken
UDer
tension
4 0
CC