Audio Settings - Sirius XM RAdio ROADY BT User Manual

Configuring Your Roady BT

Audio Settings

Audio Settings is where the Audio Output for Roady BT is selected (Aux, Bluetooth, or FM), and
where the Audio Level can be adjusted .
To select the Audio Output:
Detailed instructions for each type of audio output may be found in the following sections:
Aux: Refer to "Option 1: Aux Audio Cable Installation Instructions" on page 20 for detailed
information .
Bluetooth: Refer to "Option 2: Bluetooth Installation Instructions" on page 21 for detailed
information .
FM: Refer to "Option 3: FM Installation Instructions" on page 27 and the sections below
for detailed information . (The FM audio option requires an FM Direct Adapter which is sold
separately .)
The following sections contain further detail for the FM audio option, and assumes that you have
selected FM as your audio output option .
To find available FM channels in your area:
You need to find an available FM channels that are not being used by an FM radio station in your
area . When you tune your vehicle's FM radio to an available channel, you should only hear static or
silence – not talk or music .
Once you have found an available FM channel, you'll need to tune Roady BT and your vehicle's radio
to the same FM channel to receive the SiriusXM audio through your vehicle's radio .
We recommend one of the following methods to find an available FM channel:
1. Use the SiriusXM FM Channel Finder
Use the SiriusXM FM Channel Finder at www .siriusxm .com/fmchannel . Go to the website and
enter your zip code . The Channel Finder will suggest a list of available FM channels in your area .
For convenience, write down or print out the list .
Tune Roady BT to a SiriusXM channel (or to channel 1, if it's not activated) . Turn on your
vehicle's FM radio . Pick the first FM channel on your Channel Finder list and tune the FM radio
to that channel . If you do not hear a local FM station broadcast, then tune Roady BT to the
same FM channel . (Refer to "To set and select an FM Channel:" on page 49 .) You should
hear the SiriusXM audio through your vehicle's radio . If you are satisfied with the sound quality,
you're done! If this FM channel doesn't work well for you, work down the list until you find an
FM channel that allows you to hear the SiriusXM audio clearly .
OR
2. Manually tune through your local FM channels
Manually tune through your local FM channels on your vehicle's FM radio . Turn on your vehicle's
FM radio . Start at 88 . 1 and use the 'Manual' tune function on your vehicle's FM radio to tune
through each FM channel one-by-one (88 . 1 followed by 88 .3 etc .) to locate channels that aren't
being used by a local FM radio station . Write down each FM channel that has only static or silence
on it, until you reach 107 .9 . Once you have created your list of available FM channels, you will need
to find the one that provides the best match for Roady BT .
48
Roady BT User Guide