Step 4: Route The Antenna Cable - Sirius XM RAdio ROADY BT User Manual

Roady BT User Guide

Step 4: Route the Antenna Cable

Before you begin routing the antenna cable, read these general instructions for how to route and hide
the antenna cable . Then route your antenna cable according to the step-by-step instructions which
follow for your specific type of vehicle .
Use care when routing the antenna cable into and through the vehicle interior, avoiding sharp objects
that can damage the cable . Keep the antenna cable away from moving parts such as gas, clutch,
and brake pedals, trunk and door hinges, and sliding seat brackets . Hide the antenna wire inside the
vehicle cabin by routing the cable under the carpet and behind plastic trim, toward the Tuner Module
location . Coil and secure any excess cable in a hidden location, such as under the carpet, using wire
ties (not included) . CAUTION! Do not kink or sharply fold the antenna cable .
Use a blunt plastic putty knife, a credit card,
a plastic knife, or a similar blunt tool to lift the
rubber window moulding
Feed cable under
rubber moulding
around window
Tuck the cable under the
moulding around the window
Installation
13