Step 6: Connect The Audio - Sirius XM RAdio ONYX EZR User Manual

Onyx EZR with Vehicle Kit User Guide

Step 6: Connect the Audio

To play XM audio through your vehicle's stereo or FM radio, decide on one of the following audio
connection options:
• Option 1: Best: Use the provided Aux In Cable if your vehicle's stereo system has an auxiliary
input connection or jack . Refer to your vehicle's owners manual to find the location of the
auxiliary input jack, or consult the vehicle dealer .
TIP! The auxiliary input jack may be located on the face plate of the vehicle radio, on the
back of the radio, anywhere on the front dash panel, inside the glove compartment, or
inside the center console in between the front seats .
• Option 2: Better: Use a Cassette Adapter if your vehicle has a built-in cassette player . Cassette
Adapters are sold separately and can be purchased from an electronics retailer, or go to www .
siriusxm .com/accessories .
• Option 3: Good: Use the PowerConnect feature of Onyx Plus . PowerConnect plays the audio
through your vehicle's FM radio .
• Option 4: Best: Use the FM Direct Adapter . If none of the previous three audio connection
options will work in your vehicle, then you will need to use the FM Direct Adapter (FMDA) (sold
separately) . The FMDA needs to be installed by a professional installer and directly connects
Onyx Plus to your vehicle's FM radio . To learn more, check with the retailer where you bought
your Radio, or go to www .siriusxm .com/accessories .
Follow the installation instructions in the next several sections for the audio connection option that
you have selected .
Installation
19