Sd Card; 104 Backup; 105 Memory Info; 106 Format - Yaesu FTM-200DR Advance Manual

SD CARD

104 BACKUP

The transceiver settings information can be saved to a microSD memory card, also the
saved information can be loaded to the transceiver.
1. Press and hold the [F
2. Rotate the DIAL knob to select the operation to be performed.
WRITE TO SD
READ FROM SD
3. Press the DIAL knob.
The copy direction selection screen will be displayed.
4. Rotate the DIAL knob to select the file to be copied, then press the DIAL knob.
The confirmation screen will be displayed.
ALL
MEMORY
SETUP
5. Rotate the DIAL knob to select [OK], then press the DIAL knob.
"Completed" will be displayed when the copying is completed.

105 MEMORY INFO

Display information from SD Memory Card.
1. Press and hold the [F
The bar graph and the following information will be displayed:
Used space : xx,xxx MB
Free space : xx,xxx MB
Capacity : xx,xxx MB

106 FORMAT

Initialize a new micro-SD memory card.
Formatting a microSD memory card erases all data saved on it. Before formatting the card,
be sure to check for data and save it before formatting.
1. Press and hold the [F
The confirmation screen will be displayed.
2. To format the microSD card, turn the DIAL knob to select [ON] and then press the
DIAL knob.
Refer to the Operating Manual for details.
] key  [104 BACKUP]  Press the DIAL knob
MENU
Saves the transceiver setting information to a microSD memory
card.
Loads the information to the transceiver from a microSD mem-
ory card.
Copies all data.
Copies only the memory channels and backtrack position infor-
mation.
Copies only the set-up Menu settings.
] key  [105 MEMORY INFO]  Press the DIAL knob
MENU
] key  [106 FORMAT]  Press the DIAL knob
MENU
60