Download Print this page
Husqvarna H348SL Owner's Manual

Husqvarna H348SL Owner's Manual

48 inch mower grass catcher


532411504 Rev. 1 03.02.07 BY
Model Number H348SL
Product No. 960 73 00-02
48 Inch Mower
Grass Catcher
Customer Responsibilities
Repair Parts
Printed in U.S.A.



  Related Manuals for Husqvarna H348SL

  Summary of Contents for Husqvarna H348SL

  • Page 1 OWNER’S MANUAL Model Number H348SL Product No. 960 73 00-02 48 Inch Mower Grass Catcher • • • • 532411504 Rev. 1 03.02.07 BY Assembly Operation Customer Responsibilities Repair Parts Printed in U.S.A.
  • Page 2: Safety Rules

    Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING: In order to prevent ac- ci den tal starting when setting up, trans port ing, ad just ing or making re- pairs, al ways dis con nect spark plug...
  • Page 3: Table Of Contents

    Safe Operation Practices for Ride-On Mowers IV. TOWING • Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point. • Follow the manufacturer's recommendation for weight limits for towed equipment and towing on slopes. •...
  • Page 4 KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others.
  • Page 5: Assembly

    BAGGER SUPPORT ASSEMBLY Determine which type drawbar you have on your tractor. Compare the drawbar illustrations below to the drawbar located at the rear of your tractor. Follow the support assembly instructions that apply to your type drawbar. DRAWBAR A DRAWBAR A (See Figs.
  • Page 6 MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY (See Fig. 2) NOTE: For ease of assembly, you may wish to obtain the as sis tance of another person for mounting cover assembly to tractor. 1. Position cover assembly on ground behind tractor. 2.
  • Page 7 LOWER CHUTE (See Fig. 4) 1. Raise and hold defl ector shield in upright position. 2. Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown. 3. Hook rear latch into fl ange hole on back of mower. 4.
  • Page 8: Operation

    TIPS FOR IMPROVED BAGGING OPE RA TION: Follow the mower operation instructions in your tractor owner's manual. When operating your grass catcher on a lawn where grass and leaf bagging equipment has not been used, you are picking up thatch and debris that has accumulated for long periods of time.
  • Page 9: Customer Responsibilities

    CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS Always observe safety rules when performing any main- te nance. • Before each use check for loose fasteners. • Clean unit thoroughly after each use. BLADE CARE For best results mower blades must be kept sharp. Re place bent or damaged blades.
  • Page 10: Repair Parts

    REPAIR PARTS GRASS CATCHER - MODEL NUMBER H348SL (PRODUCT NO. 960 73 00-02) PART DESCRIPTION 532401047 Adapter 532069180 Nut, Crown lock #10-24 532192709 Screen, Cover 532195373 Cover Assembly (Includes 34, 37) 532176741 Chute, Upper 818021008 Screw, Special #10-14x1/2 532130933 Full Bag Indicator...