Related Manuals for Husqvarna H342SG
Summary of Contents for Husqvarna H342SG
- Page 1 OWNER’S MANUAL Model Number H342SG Product No. 960 73 00-08 42 Inch Mower Grass Catcher • Assembly • Operation • Customer Responsibilities • Repair Parts 532411521 12.19.06 CL Printed in U.S.A.
-
Page 2: Safety Rules
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. -
Page 3: Table Of Contents
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING machine. Repair, if necessary, before restarting. • Never make any adjustments or repairs with the engine • Tow only with a machine that has a hitch designed for running. towing. Do not attach towed equipment except at the •... - Page 4 KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others.
-
Page 5: Assembly
ASSEMBLY MOUNTING COVER ASSEMBLY TO HANG SUPPORT ASSEMBLY ON SUPPORT ASSEMBLY (See Fig. 2) REAR DRAWBAR (See Fig. 1) NOTE: For ease of assembly, you may wish to obtain the 1. Slide flanges of support assembly into drawbar slots assistance of another person for mounting cover assembly first, then, pivot backwards inserting pin into drawbar to tractor. - Page 6 LOWER CHUTE (See Fig. 4) CONTAINER MOUNTING (See Fig. 3) 1. Raise and hold deflector shield in upright position. 1. Install one container to left side first. Install another container to center position and one in right position. 2. Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as NOTE: Left edge of right con tainer should always over lap shown.
- Page 7 LEVEL MOWER DECK UPPER CHUTE (See Figs. 5A and 5B) 1. Lower mower to its lowest cutting position. Be sure deck is properly leveled for best mower per for - mance. See your tractors owner's manual for instruc- 2. Assemble upper chute by inserting curved end into tions.
-
Page 8: Operation
OPERATION TIPS FOR IMPROVED BAGGING • Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fill. The OPERA TION: wheel will be spinning fastest just before the bags fill Follow the mower operation instructions in your tractor completely. -
Page 9: Customer Responsibilities
CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS CAUTION: Grass catcher components Always observe safety rules when performing any main- are subject to wear, damage and tenance. deterioration, which could expose moving parts or allow objects • Before each use check for loose fasteners. to be thrown. -
Page 10: Repair Parts
REPAIR PARTS GRASS CATCHER - MODEL NUMBER H342SG (PRODUCT NO. 960 73 00-08) PART PART DESCRIPTION DESCRIPTION 532069180 Nut, Crown lock #10-24 532162803 Chute, Lower 532192709 Screen, Cover 871161010 Screw #10-24 x 5/8 532004939 Spring, Retainer 532195373 Cover Assembly (Includes 34, 37)