Table of Contents
Advertisement
IMPORTANT INFORMATION
Before pushing or towing tractor,
transmission dump valves must be
opened and park brake released. The
tractor should never be pulled at more
than 2 miles per hour (3.2 km/h) or for
distances over ¼ mile (.402 km). Trailer
the unit for distances over ¼ mile.
Moving by Hand
WARNING!
Make no adjustments without:
•
the engine stopped
•
the ignition key removed
•
the parking brake activated
When pushing or pulling unit, the hydraulic pump
dump valves must be opened
•
Always turn off engine before engaging or
disengaging the hydro release.
•
The hydro release valves are located below
the seat, on the front side of the hydro
pumps.
•
Raise the deck into the highest cutting
position.
•
Lift the seat frame assembly to access the
release valves.
•
Use a
/
" wrench to rotate bolt counter-
5
8
clockwise two full turns to disengage pump.
•
Repeat the procedure for the opposite pump.
•
To engage, rotate each pump bolt clockwise
until the bolt is snug. Do not overtighten the
release valve or damage to the hydro pump
could occur.
OPERATION
1
1. Left hydro pump
2. Release valve
Bypass linkages
2
8050-767
29
-
English
Advertisement
Table of Contents
