Table of Contents
Advertisement
Running
1. Release the parking brake by moving the
lever downward.
Your mower is equipped with an operator
presence system. When the engine is
running, any attempt by the operator to leave
the seat without first setting the parking
brake will shut off the engine.
2. Move the steering controls to the neutral
position (N).
3. Select the cutting height by the cutting height
pedal.
WARNING!
Ensure that no one is near
mower when engaging blade
switch.
4. Engage the mower deck by pulling out the
blade switch.
5. Move throttle control to full throttle (not
choke)
6. The machine's speed and direction are
continuously variable using the two steering
controls. When both controls are in the
neutral position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves
in a straight line forward or backward
respectively.
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation of
the right wheel is reduced and the machine
turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its neutral
position.
OPERATION
Released parking brake
Cut height selection
Engaging the mower deck
8050-783
8050-784
8011-669
25
-
English
Advertisement
Table of Contents
