first, otherwise, the controller will not work normally. After altering the TCP/IP
parameter, restart the controller, the alteration will take effect.
4 Parts and Assembly
This kit includes the following parts. Please check before installation.
Controller
Instruction manual
Wiring terminal
5 Introduction for Controller
5.1 Interface
5.1.1 Diagram of Interface Function
5.1.2 Power
The input power supply is 24V DC, there are two power supply input interfaces,
only one is needed during operation; the power supply output is not applicable in
this device, please do not connect to electric appliance, otherwise it may cause
malfunction of Controller.
Fig. 5.1 Schematic of interfaces
3
Intelligent Controller
1 set
1 set
4 sets