Table of Contents
Advertisement
When a value is included as part of the path name, it will be
shown at the end of the path name after an equals sign. If the
value represents a configuration setting, an explanation will
be shown in parenthesis after the value. As an example,
ConfigurationOPT1MLV.S = 1 (Minimum Load Valve
Select).
Pressing the
and
ESCAPE
will scroll an expanded text description of the point name or
value across the display. The expanded description is shown in
the local display tables but will not be shown with the path
names in text.
The CCN (Carrier Comfort Network
referenced in the local display tables for users configuring the
unit with CCN software instead of the local display. The CCN
tables are located in Appendix B of the manual.
Basic Control Usage
SCROLLING MARQUEE DISPLAY — The scrolling mar-
quee display is the standard interface display to the ComfortLink
Control System for 30MP units. The display has up and down
arrow keys, an
key, and an
ENTER
keys are used to navigate through the different levels of the
display structure. Press the
operating level is displayed to move through the top 11 mode
levels indicated by LEDs (light emitting diodes) on the left side
of the display. See Fig. 1 and Tables 2-14.
Once within a mode or sub-mode, pressing the
and
ESCAPE
keys simultaneously will put the scrolling
marquee display into expanded text mode where the full mean-
ing of all sub-modes, items and their values can be displayed
for the current selection. Press the
keys to return the scrolling marquee display to its default menu
of rotating display items (those items in Run Status
In addition, the password will be disabled, requiring that it be
entered again before changes can be made to password protect-
ed items. Press the
ESCAPE
text mode.
NOTE: When the Language Selection (Configuration
DISP
LANG), variable is changed, all appropriate display
expansions will immediately change to the new language. No
power-off or control reset is required when reconfiguring
languages.
When a specific item is located, the item name alternates
with the value. Press the
ENTER
and the value will be displayed. Press
value will begin to flash indicating that the value can be
changed. Use the up and down arrow keys to change the value,
and confirm the value by pressing the
MODE
Run Status
Service Test
Temperature
Pressures
Setpoints
Alarm Status
Inputs
Outputs
ESCAPE
Configuration
Time Clock
Operating Modes
Alarms
Fig. 1 — Scrolling Marquee Display
keys simultaneously
ENTER
) point names are also
®
ESCAPE
key. These
ESCAPE
key until the highest
ENTER
and
ESCAPE
ENTER
VIEW).
key to exit out of the expanded
key at a changeable item
again and the
ENTER
key.
ENTER
ENTER
Changing item values or testing outputs is accomplished in
the same manner. Locate and display the desired item. Press
so that the item value flashes. Use the arrow keys to
ENTER
change the value or state and press the
it. Press the
ESCAPE
structure. Repeat the process as required for other items.
Items in the Configuration and Service Test modes are pass-
word protected. The words 'PASS' and 'WORD' will alternate
on the display when required. The default password is 0111.
Press
ENTER
and the 1111 password will be displayed. Press
again and the first digit will begin to flash. Use the
ENTER
arrow keys to change the number and press
the digit. Continue with the remaining digits of the password.
The password can only be changed through CCN operator in-
terface software such as ComfortWORKS
and Service Tool.
See Tables 2-14 and Appendix A for further details.
ACCESSORY NAVIGATOR™ DISPLAY MODULE —
The Navigator module provides a mobile user interface to the
ComfortLink™ control system, which is only available as a
field-installed accessory. The display has up and down arrow
keys, an
ENTER
used to navigate through the different levels of the display
structure. Press the
is displayed to move through the top 11 mode levels indicated
by LEDs on the left side of the display. See Fig. 2.
Once within a Mode or sub-mode, a ">" indicates the cur-
rently selected item on the display screen. Pressing the
and
ESCAPE
ENTER
igator module into expanded text mode where the full meaning
of all sub-modes, items and their values can be displayed. Press-
ing the
ENTER
'Select Menu Item' (Mode LED level) will return the Navigator
module to its default menu of rotating display items (those items
in Run Status
abled, requiring that it be entered again before changes can be
made to password protected items. Press the
exit out of the expanded text mode.
NOTE: When the Language Selection (Configuration
DISP
LANG), variable is changed, all appropriate display
expansions will immediately change to the new language. No
power-off or control reset is required when reconfiguring
languages.
When a specific item is located, the item name appears on the
left of the display, the value will appear near the middle of the
display and the units (if any) will appear on the far right of the
display. Press the
ue will begin to flash. Use the up and down arrow keys to change
the value, and confirm the value by pressing the
Changing item values or testing outputs is accomplished in
the same manner. Locate and display the desired item. Press
so that the item value flashes. Use the arrow keys to
ENTER
change the value or state and press the
it. Press the
ESCAPE
structure. Repeat the process as required for other items.
Items in the Configuration and Service Test modes are pass-
word protected. The words Enter Password will be displayed
when required, with 1111 also being displayed. The default
password is 1111. Use the arrow keys to change the number
3
ENTER
key to return to the next higher level of
ENTER
®
, ComfortVIEW™
key, and an
ESCAPE
key. These keys are
ESCAPE
key until 'Select a Menu Item'
keys simultaneously will put the Nav-
and
keys when the display says
ESCAPE
VIEW). In addition, the password will be dis-
key at a changeable item and the val-
ENTER
ENTER
key to return to the next higher level of
key to accept
to accept
key to
ESCAPE
key.
ENTER
key to accept
Hide quick links:
Advertisement
Table of Contents
