The amounts of water to be taken in for the programs are controlled by the water
meters. Water level sensor serves the basic functions of deciding to take in water
again, control the heater safety level, door opening level or foam level.
Also, if there are any error in the water meters or its connections, water is taken in with
the water level sensor.
Picture 3.5 Water level sensor
Washing Motor
3.4
3.4.1 Atlas Motor
Picture 3.6 Vector and Atlas motor
Picture 3.7 Vector and Atlas motor
Sensitivity: Public
BLG15 C7S SERVICE MANUAL
Cable inputs
5VDC / Data / GND.
Operating Voltage : 5 VDC
When it is empty, 625 ± 2 Hz frequency value should
be read from the Data and GND terminals.