Configuring The System - ADTRAN NetVanta 2000 Series Quick Start Manual

Configuring the System

The NetVanta 2000 series products can be accessed and managed via the LAN interface using an ethernet
crossover cable (provided with the NetVanta 2100). Alternately, the NetVanta 2000 series may be accessed
using a hub and two ethernet cables (one for the PC and one for the NetVanta). Using a PC with an installed
browser (Internet Explorer 5.0 for optimal viewing), the NetVanta can be configured using the web GUI.
Netvanta 2000 Series
WAN LAN
2
Connecting to the NetVanta
1. Connect the NetVanta 2000 series LAN interface to the PC using the appropriate ethernet cable.
2. Supply power to the PC and the NetVanta unit and begin the operating system boot up process.
During the boot up process, the PC will obtain an IP address from the NetVanta 2000 series DHCP
server. Alternately, complete the process for releasing and renewing captured IP addresses to
obtain a new IP address from the NetVanta 2000 series DHCP server. Please refer to your
specific PC operating system documentation for details on that process.
3. Open your installed browser and in the URL field enter 10.10.10.1. The NetVanta 2000 series login
screen will appear.
4. Enter your username and password and click the login button. When connecting to the NetVanta
2000 series for the first time, the username is admin and there is no set password.
ADTRAN strongly recommends immediately changing the admin password for security
purposes. Refer to DLP-002 in the NetVanta 2000 series System Manual (PN 61200361L1-
1) for details.
5. After logging in to the NetVanta 2000 series, the welcome screen will appear.
Netvanta 2000 Series
WAN LAN
COM 1
Ethernet Crossover Cable
Direct Connection to PC
Ethernet Hub
COM 1
POWER
POWER
Ethernet Cable
Connection through Hub
POWER
UPLINK 1 2 3 4
Ethernet Cable
2
PC
PC