Automatic Mode (Ecg) Settings - Schiller AT-2plus Manual

Chapter 1
Operating Elements

Automatic Mode (ECG) Settings

Two separate Auto formats can be defined for the AT-2plus. When defining auto format 1 the key
sequence ALT `1` precedes the setting. When defining auto format 2 the key sequence ALT `2`
precedes the setting.
The automatic mode formats are detailed on the following pages. The ECG format is set as follows:
Page 1.20
Automatic ECG Format
Entry Key
Sequence
1
ALT
2
Entry Key Sequence
1
2
5
6
ALT 1 or 2 1
7
8
9
0
SCHILLER AT-2plus 6-Channel ECG Unit
SERVICE HANDBOOK Issue d May 2002
Setup Format
Commence Setup for
Auto format 1
Commence Setup for
Auto format 2
ECG Format
Printout
1page x 12 leads at 25mm/s
One page with the first 8 leads
printed for 5s and the last 4
leads printed for 10s
No leads printed
Leads are printed in short form
(1 sheet)
Leads are printed in long form
(2 sheets)
Chart Speed 25mm/s
Chart Speed 50mm/s
Leads are printed in format 4
* 3(25mm/s) + 1
rhythm(25mm/s)
Confirm
Press
STOP key