Data Bits; Flow Control; Inter-Character Delay - CipherLab SmartScan Manual

3.2.4 DATA BITS

Serial Command
0034

3.2.5 FLOW CONTROL

Serial Command
0042
Serial Command
0044

3.2.6 INTER-CHARACTER DELAY

1) Read this label to specify the inter-character delay.
2) Read the "Decimal
3) Read the "Validate" label on the same page to complete this setting.
Serial Command
0015
<8 bits>
<None>
Data Ready
Value" label on page 57 for the desired inter-character delay (millisecond).
Chapter 3
Serial Command
0035
Serial Command
0043
Serial Command
0045
Update
Output Interfaces
7 bits
Scanner Ready
Invert Data Ready
Inter-Character
Delay ...
17