Msi Parameters - CipherLab SmartScan Manual

Scanner Configuration

4.10 MSI PARAMETERS

Serial Command
0112
CHECKSUM VERIFICATION
Serial Command
0167
Serial Command
0169
CHECKSUM TRANSMISSION
Serial Command
0170
Serial Command
0172
CODE LENGTH QUALIFICATION
1) Read the label to enable either Max. /Min. length qualification or fixed length qualification.
2) Read the labels for Max. /Min or fixed length separately.
3) Read the "Decimal
4) Read the "Validate" label on the same page to complete this setting.
Serial Command
0220
34
SmartScan Manual
Enable
<Single Modulo 10>
Modulo 10 & 11
<Last Digit Not
Transmitted>
Both Digits Not
Transmitted
Value" label on page 57 for the desired inter-character delay (millisecond).
Enable Max./Min. Length ...
Serial Command
0113
Serial Command
0168
Serial Command
0171
Enter Setup
<Disable>
Double Modulo 10
Both Digits
Transmitted