Output Interfaces; Keyboard Wedge Parameters; Activate And Select Keyboard Type - CipherLab SmartScan Manual

OUTPUT INTERFACES

3.1 KEYBOARD WEDGE PARAMETERS

3.1.1 ACTIVATE AND SELECT KEYBOARD TYPE

1) Read this label to activate Keyboard Wedge and select a keyboard type.
2) Read the "Decimal
keyboard type.
3) Read the "Validate" label on the same page to complete this setting.
Serial Command
0000
NO. KEYBOARD TYPE
1 PCAT (US)
2 PCAT (French)
3 PCAT (German)
4 PCAT (Italian)
5 PCAT (Swedish)
6 PCAT (Norwegian)
7 PCAT (UK)
8 PCAT (Belgium)
9 PCAT (Spanish)
10 PCAT (Portuguese)
11 PS55 A01-1
12 PS55 A01-2 (Japanese)
13 PS55 A01-3
14 PS55 001-1
Value" label on page 57. Refer to the table below for the number of desired
NO. KEYBOARD TYPE
15 PS55 001-81
16 PS55 001-2
17 PS55 001-82
18 PS55 001-3
19 PS55 001-8A
20 PS55 002-1, 003-1
21 PS55 002-81, 003-81
22 PS55 002-2, 003-2
23 PS55 002-82, 003-82
24 PS55 002-3, 003-3
25 PS55 002-8A, 003-8A
26 IBM 3477 Type 4 (Japanese)
27 PS2-30
28 IBM 34XX/319X, Memorex Telex 122 Keys
Update
Chapter 3
Activate & Select
Keyboard Type ...
13