Matrix 25 - CipherLab SmartScan Manual

Scanner Configuration
CODE LENGTH QUALIFICATION
1) Read the label to enable either Max. /Min. length qualification or fixed length qualification.
2) Read the labels for Max. /Min or fixed length separately.
3) Read the "Decimal
4) Read the "Validate" label on the same page to complete this setting.
Serial Command
0212
Serial Command
0214
Serial Command
0213
Serial Command
0214

4.3.3 MATRIX 25

Serial Command
0084
START / STOP PATTERN SELECTION
Serial Command
0136
Serial Command
0138
28
SmartScan Manual
Value" label on page 57 for the desired inter-character delay (millisecond).
Enable Max./Min. Length ...
Max. Length
Enable Fixed Length ...
Fixed Length 1
Enable
Industrial 25
<Matrix 25>
Serial Command
0215
Serial Command
0215
Serial Command
0085
Serial Command
0137
Enter Setup
Min. Length
Fixed Length 2
<Disable>
Interleaved 25