Table of Contents
Advertisement
5. At the ok prompt, type:
ok nvstore
ok reset-all
Your system will reset and the banner will appear.
6. Press the Stop-A keys to get to the ok prompt.
7. At the ok prompt, type show-devs to list your system devices and verify
that the name property was changed correctly.
You should see the full path name of the hme device, excluding SUNW, prior
to hme, similar to the example below:
/sbus@1f,0/hme@1,8c30000
/sbus@1f,0/hme@1,8c20000
/sbus@1f,0/hme@1,8c10000
/sbus@1f,0/hme@1,8c00000
Note – You need to select only one of these hme devices for booting.
8. At the ok prompt, type:
ok boot (full path name of an hme device)
Installing the Sun QuadFastEthernet Driver Software
3
25
Advertisement
Table of Contents
Need help?
Do you have a question about the Quad FastEthernet and is the answer not in the manual?
Questions and answers