Table of Contents
Advertisement
3
Installing the Solaris Environment on a System with the Sun Quad FastEthernet
SBus Adapter
18
2. Install the software drivers from the Sun QuadFastEthernet Driver
Software CD-ROM that came with the Sun Quad FastEthernet SBus
Adapter.
See "Installing the Software Drivers From the CD-ROM" on page 12 for
more information.
3. Reboot the system.
Refer to the Solaris 2.x Peripheral's Handbook for more information.
After installing the Solaris environment on your system, you must install the
Sun QuadFastEthernet software drivers before you reboot the system. The
FastEthernet (hme) driver that exists on the Solaris 2.5 and 2.5.1 operating
environments does not support the Sun Quad FastEthernet SBus Adapter.
Therefore, the system will fail to load and configure the correct software driver.
1. Complete the Solaris client installation.
Refer to your Solaris documentation for detailed instructions.
Note – After you have installed the Solaris operating environment, you must
reinstall the Sun QuadFastEthernet Driver Software before rebooting.
2. Install the software drivers from the Sun QuadFastEthernet Driver
Software CD-ROM that came with the Sun Quad FastEthernet SBus
Adapter.
See "Installing the Software Drivers From the CD-ROM" on page 12 for
more information.
3. Reboot the system.
Refer to the Solaris 2.x Peripheral's Handbook for more information.
Sun Quad FastEthernet SBus Adapter Installation and User's Guide—April 1997
Advertisement
Table of Contents
