Sun Microsystems Quad FastEthernet Installation And User Manual page 36

3
24
1. At the ok prompt, type:
ok setenv use-nvramrc? true
ok show-devs
The show-devs command lists the system devices. You should see the full
path name of the hme channels, similar to the example below:
/sbus@1f,0/SUNW,hme@1,8c30000
/sbus@1f,0/SUNW,hme@1,8c20000
/sbus@1f,0/SUNW,hme@1,8c10000
/sbus@1f,0/SUNW,hme@1,8c00000
2. Type:
ok nvedit
3. Type the following, spaces and quotation marks included, pressing the
Return key at the end of all but the last line.
You should do the same procedure for other hme devices on your system
(for example, if your system has a SunFastEthernet SBus Adapter 2.0).
0: probe-all install-console banner
<full path to channel 1>
1: cd
2: " hme" nameprop
3: device-end
<full path to channel 2>
1: cd
2: " hme" nameprop
3: device-end
<full path to channel 3>
1: cd
2: " hme" nameprop
3: device-end
<full path to channel 4>
1: cd
2: " hme" nameprop
3: device-end
4. Press the Control-C keys after typing the final device-end.
Sun Quad FastEthernet SBus Adapter Installation and User's Guide—April 1997