Sun Microsystems Quad FastEthernet Installation And User Manual page 28

3
16
2. Search the /etc/name_to_major file for FastEthernet (hme) entries.
# grep hme /etc/name_to_major
hme 119
If your system already has a FastEthernet (hme) device installed on your
system (for example, if your system contains a SunFastEthernet SBus
Adapter 2.0), skip to Step 4.
3. If the /etc/name_to_major file does not contain a FastEthernet (hme)
entry, add an entry for the Sun Quad FastEthernet SBus Adapter device
(hme).
If the major device number for the last file entry is n then use n+1 for the
hme channel major device number. As shown in the example below, if the
last entry for the major device number is 108, use 109 for the hme device.
# llcl 107
# audiocs 108
# hme 109
4. Mount the Sun QuadFastEthernet Driver Software 1.0 CD-ROM.
See "Mounting the CD-ROM," on page 12, for more information.
5. Copy the hme driver from the CD-ROM to the client's root partition.
If you are running Volume Manager, you can copy the driver as follows:
# cp \
/cdrom/sun_quadfast_1_0/Sol_2.4/SUNWhmdl/reloc/kernel/drv/hme \
DIR/export/exec/kvm/<archive_of_arch>/kernel/drv
If you are not running Volume Manager, and you have mounted the
CD-ROM as described in "Mounting the CD-ROM" on page 12, copy the
driver as follows:
# cp /cdrom/Sol_2.4/SUNWhmdl/reloc/kernel/drv/hme \
DIR/export/exec/kvm/<archive_of_arch>/kernel/drv
Sun Quad FastEthernet SBus Adapter Installation and User's Guide—April 1997