Table of Contents
Advertisement
5.1
Ethernet remote control (Optional)
The Ethernet option for the P7xxxR series products adds the ability to control the unit
by Ethernet as well as by the existing standard RS232 or RS485, this is achieved via a
separate module within the unit.
The unit can be controlled through the Ethernet port using three different approaches.
TCP Port
The unit can be controlled using the serial remote control messages as described
earlier sent through the TCP port set in the Ethernet menu option. The address is fixed
at 32.
Web Page
The unit can be controlled via the in-build web server's web page. There are two pages,
Status and Configure. Hopefully both of which are self explanatory.
SNMP
The P7xxx series units fitted with Ethernet, have built-in SNMP (Simple Network
Management Protocol) agent software.
It supports SNMP Trap, RFC1155, 1157, 1212, 1213, 1901 & 1906, as well as the
Peak MIBS.
The Peak SNMPv2 MIB files are supplied by Peak Communications Ltd, below is a
quick overview of them.
Page 35
P7001R & P7002R Series Converters
Advertisement
Table of Contents
