PEAK COMMUNICATIONS P7001R Installation And Operating Handbook page 5

This manual covers the installation and operation of the P7001R and P7002R Up
and Down frequency converters. A sample specification and review of generic
specification parameters is incorporated in this manual, but is not guaranteed to be
the latest specification or to represent all products covered by this manual, so
please visit our website www.peakcom.co.uk for exact up to date specifications of
the unit in question.
All P7000R series converters are housed in an IP66 diecast enclosure 290 x 230 x
95mm (11.4 x 9.1 x 3.7inch) and are designed to connect between a Modem IF,
and provide an L or S-Band interface as required. The units are especially suitable
for systems requiring an IBS and Eutelsat SMS compliant high stability low phase
noise frequency converter for both data and analogue TV signals.
The units are under constant development and new features may not be included
in this manual.
Models covered in this manual:-
P7001R
P7002R
The P7001R and P7002R units provide a high stability 10MHz reference signal and
22.5V DC power for both the transmit and receive paths to power an external Block
Up and Downconverter. The P7000R series of converters will interface with the
Peak CANBUS redundancy units for 1:1, 1:2 and 1:N systems (see RT1000R
RT2000R and RCU1800 data sheets)
Page 5
L-Band to IF DownConverter
IF to L-Band UpConverter
P7001R & P7002R Series Converters