Table of Contents
Advertisement
To ensure safety of operator the P7000 series of converters have been designed
to comply with the following safety standard;
EN 60950:
business machines
Operation of the equipment in a non standard manner will invalidate compliance
to this standard.
The equipment MUST BE OPERATED WITH ITS LID ON AT ALL TIMES. If it is
necessary to remove the lid for any purpose then it is essential that the lid is
fitted back correctly before normal operation.
DANGEROUS VOLTAGES ARE PRESENT AROUND THE POWER SUPPLY
AND PRECAUTIONS MUST BE TAKEN.
EMC
The P7000 Series of converters have been designed to comply with the following
standards;
Emissions:
radio interference characteristics of Information Technology Equipment.
Immunity
commercial and light industrial environment.
Damage to the keyboard membrane or mechanical damage to the chassis will
also invalidate compliance; please contact the factory under these
circumstances for advice on continued operation.
Interfaces to the P7000 Series of converters must be made with suitably
screened connectors and double screened coaxial cable. Data cables must be
double screened.
All 'D' type connectors must have grounding fingers on the plug shell to
guarantee continuous shielding. The back-shells must comply to the
requirements of VDE 0871 and FCC 20708, providing at least 40 dB of
attenuation from 30 MHz to 1 GHz.
Installations which do not comply with this requirement will invalidate the EMC
specifications.
1. INTRODUCTION
1.1 General product overview
Page 4
Safety of information technology equipment, including electrical
.
EN 55022 Class B; Limits and methods of measurement of
EN 50082 Part 1; Generic immunity standard, part 1: Domestic,
P7001R & P7002R Series Converters
Advertisement
Table of Contents
