Configure
This menu allows the user to configure different parts of the unit, the menu choice change
depending on the unit, its options, and whether the unit is in remote or local mode.
When in local mode all the menu items are available to the user to change, when in remote
mode only the REMOTE CONTROL menu option is available.
Figure 3, below, shows a basic configure menu, however as stated above the menu choices
change depending on the unit, the installed trays and their options.
The possible list of tray options that have their own configure menu items and associated
configuration screens including:
Attenuation
Allows the attenuation of the RF path of the selected tray to be changed, the step size and
range are tray/option specific.
Remote control
Selects a sub-menu with further menus. If the Ethernet module is not installed then the
following menu will be shown:
Issue 3.20
DBUH / DLAH / DTLH Installation and Operation Handbook
Figure 4
Figure 5
Figure 6
Figure 7
Page 8