Konica Minolta bizhub C750i Installation Manual page 18

<Only for changing the paper size to B5 , 16K ,
A5 >
(3) Remove the end guide plate (front). (Two
screws)
<Inch area>
<Metric area>
(4) Remove the paper guide plate (front/rear).
• Paper guide plate (front): Four SEMS II
screws
• Paper guide plate (rear): Four bind screws
SEMS II screw: 4
(5) Align the paper guide plate (rear) with the line
marked in the bottom of the tray. Secure the
paper guide plate. (Four bind screws)
Note:
• Be sure that the type of screws is correct.
• When changing to A5, insert the paper guide
plate (rear) into the hole and press it toward
the rear end of the hole until it stops. Secure
the plate with screws.
• When changing to 5.5", insert the paper guide
plate (rear) into the hole and press it toward
the front end of the hole until it stops. Secure
the plate with screws.
Front
E-18
Bind screw: 4
Rear