(7) Move the front cover assy while taking notice
of the scale on the cover and the reference line
on the screw.
(8) Tighten the six screws which have been loos-
ened.
(9) Check if there is any position misalignment be-
tween the front covers of the trays 3 and 4.
19. Changing paper size (Tray 3, tray 4)
Note:
Perform this procedure only when changing the
default paper size (Inch area: Letter, Metric area:
A4) is required.
(1) Slide out the tray 3.
<Only for changing the paper size to Letter >
(2) Remove the end guide plate (front/rear). (Two
screws for each)
E-17