Konica Minolta bizhub C750i Installation Manual page 16

18. Aligning the front covers (Trays 3 and
4)
Note:
Perform this procedure if necessary.
(1) Check if there is any position misalignment
among the front cover of the tray 2 of the main
body and the front covers of the trays 3 and 4.
Note:
If there is any misalignment, conduct the work af-
ter the step (2).
(2) Slide out the tray 3 and loosen the 11 indicated
screws.
Screw
Screw
(3) Move the front cover assy while taking notice
(4) Tighten the 11 screws which have been loos-
(5) Check if there is any position misalignment be-
(6) Slide out the tray 4 and loosen the six indicated
Screw
E-16
of the scale on the cover and the reference line
on the screw.
ened.
tween the front covers of the trays 2 and 3.
screws.
Screw
Screw
Screw