Spreader Setup - PROAIM CINEMA Series Assembly Manual

Jib Stand Setup

Take out the Tripod Stand from its case,
stretch its legs on the floor as required, and
tighten the knob to secure it.

Match the bottom leg section holes with the
upper leg section to secure the tripod stand
with Steel locking Pins and tighten the knob.
NOTE: We have provided double-locking
precautions on Jib Stand. The pin is primary;
the locking knob is secondary locking, so lock
the pin to prevent the stand from slipping.

Spreader Setup

NOTE: For setting up your Crane package with spreader or with floor dolly follow the below steps:

Place the spreader on the floor, spread its
legs (as required) with the help of a provided
knob.

Put tripod stand on spreader & lock it in
place with the rubber grips.
Knob
Pin
5