Sharp AH-X08CR Service Manual page 33

Drain pan and related
1. Remove 3 screws fixing motors.
Drain pan
Projection
Groove
To disconned
2. Turn the cap area of the drain hose counterclockwise,
and remove it from the drain pan.
During installation, turn the drain hose to the state of
the "engagement position".
After reinstallation, verify that it is securely fastened.
How to remove the horizontal louver
Slightly pull down the hinge area, defelect thge louver,
and unhook it from the hinge. Remove the shaft from
each of the left and right sides.
Drain Hose
To reconnect
37
AH/AY-X08CR
AH/AY-X10CR
AH/AY-X13CR