Download Print this page
Valcom VIP-148AL-SA Syn-Apps Manual

Valcom VIP-148AL-SA Syn-Apps Manual

Advertisement

Quick Links

INTRODUCTION
The VIP-148AL-SA Syn-Apps® Compliant IP
Talkback Horn enables two-way handsfree voice
access to a single location over an IP-based
network. The horn audio level is electronically
adjusted from the Syn-Apps server. A call switch
input connection is provided for call initiation.
Power is provided to the VIP-148AL via a Power
over Ethernet (PoE) switch meeting the 802.3af
specification.
SPECIFICATIONS
Access Methods
Syn-Apps Revolution server
SIP telephone system
Features
RJ-45 for network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Dimensions/Weight:
VIP-148AL-SA Horn
7.38" H x 10.0" W x 10.4" D
(18.75cm x 25.4cm x 26.42cm)
Weight: 3.70 lbs. (1.68 kg)
Network Interface
1.62" H x 5.63" W x 3.45" D
(4.11 cm) x (14.30 cm) x (8.73 cm)
with brackets – 8.22" W (20.87 cm)
Weight: 2.10 lbs. (0.95 kg)
Environment
Network Interface:
Temperature:
Humidity:
0 to 85% non-precipitating
Horn:
Suitable for indoor or outdoor installation
VIP-148AL-SA
Syn-Apps® Compliant
IP Talkback Horn
0 to +40° C
1
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area may cause
harmful interference in which case the user
will be required to correct the interference at
his own expense.
Issue 1
Class 3
947565

Advertisement

loading

Summary of Contents for Valcom VIP-148AL-SA Syn-Apps

  • Page 1 VIP-148AL-SA Syn-Apps® Compliant IP Talkback Horn INTRODUCTION The VIP-148AL-SA Syn-Apps® Compliant IP Talkback Horn enables two-way handsfree voice access to a single location over an IP-based network. The horn audio level is electronically adjusted from the Syn-Apps server. A call switch input connection is provided for call initiation.
  • Page 2 INSTALLATION  Mount the base to wall studs using the two Operation: holes provided. Knockout holes are provided Provides talkback intercom via Network for punch out should additional holes be connection to customer telephone system, desired. See Figure 3. Syn-Apps Revolution server or other destination. Interface to customer telephone system can be The horns may be rotated or moved up and down via SIP registration, FXO port or FXS port...
  • Page 3 Revolution server. Refer to the Syn-Apps documentation for further information. Additional setup, if necessary, will be done using the Valcom IP Solutions Setup Tool. The IP Solutions Setup Tool is available for download on Figure 3. Mounting to Wall stud the Valcom website at www.valcom.com/vipsetuptool.
  • Page 4 SIDE RJ45 NETWORK CONNECTION HORN HORN SIGNAL CONNECTION SIDE RJ-45 RJ45 Typical 568B RJ45 NETWORK RJ-45 Jack CONNECTION BROWN BROWN BROWN HORN WHITE/BROWN WHITE/BROWN GREEN GREEN CAT 3/5/6 WHITE/GREEN WHITE/GREEN ORANGE ORANGE CALL IN SWITCH WHITE/ORANGE WHITE/ORANGE NORMAL OPEN BLUE BLUE MOMENTARY CLOSED WHITE/BLUE...