Valcom VIP-130L User Manual

VIP-130L IP Paging Horn
INTRODUCTION
The VIP-130L IP Paging Horn is a self contained
paging system which enables voice paging up to
1200 feet from an Ethernet connection. The
VIP-130L consists of a high efficiency 5 Watt Class-D
Horn and a VIP-LLE Network Extender allowing
stand alone capability when used with a SIP enabled
telephone system or can be accessed from a variety
of Valcom managed VoIP products.
SPECIFICATIONS
Access Methods

PBX, FXO Port w/VIP-811

POTS telephone set w/VIP-811

PBX, FXS Port w/VIP-821

Valcom M Cast Page Group

SIP telephone system
Features

RJ-45 network connection

LED Status Indicator

Network activity LEDs

Power over Ethernet (PoE) 802.3af compatible

High Efficiency Class-D 5 Watt Amplifier
Dimensions/Weight
(Horn)

7.00" H x 10.00" W x 10.00" D
(18.75 cm H x 25.4 cm W x 26.4 cm D)

Weight: 5.8 lbs. (2.63 kg)
Network Extender
(VIP-LLE)

1.30" H x 6.10" W x 6.00" D
(3.51 cm H x 15.72 cm W x 13.51 cm D)

Weight: 0.85 lbs. (0.39 kg)
Environment
Temperature:
Humidity: 0 to 85% non-precipitating
0 to +40° C
1
Nominal Specifications – HORN
Input Impedance:
Input Level:
Output Impedance:
Output Level:
Nominal Specifications – VIP-LLE
Via 802.3af PoE Ethernet Switch:
Packing List
Qty Item
1 VIP-LLE Network Extender
1 5 Watt High Efficiency Horn
1 VSP Document
2 Mounting Brackets
4 Rubber Pads
4 Wood Screws
1 "C" Clamp
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses
and can radiate radio frequency energy and if not
installed and used in accordance with the
ISSUE 6
600 Ohms
-10dBm
600 Ohms
-10dBm nominal
Class 3
947628