Table of Contents
Advertisement
User's Manual
USB Transfer time-out
This item Sets the timeout period for control, batch, and interrupt transmission. The default is 20 seconds.
Device reset time-out
This item sets boot command timeout of the large capacity USB disk. The default is 20 seconds.
Device Power-up Delay
This item sets the maximum delay time that the USB device reports to the primary controller.
Mass Storage Devices
This item is used to set the specific type of connected USB device. The setting value is
[Auto][Floppy][Forced FDD][Hard Disk][CD-ROM], the default is Auto.
3.2.4 Chipset Menu
The chipset menu items allow you to change the settings for the North Bridge chipset, South Bridge
chipset and other system.
Figure 3.16
47
Advertisement
Table of Contents
