Download Print this page

Checking Propeller - Yamaha E40X Owner's Manual

Hide thumbs Also See for E40X:

Advertisement

210012
602051
602054
q
w
e
r
t
y
001495
EML08013

CHECKING PROPELLER

w
You could be seriously injured if the
engine accidentally starts while you are
near the propeller.
8 Before
inspecting,
installing the propeller, remove the
spark plug caps from the spark plugs.
Also, put the shift control in Neutral,
put the main switch in the "OFF" posi-
tion and remove the key, and remove
the lanyard from the engine stop
switch. Turn off the battery cut-off
switch if your boat has one.
8 Do not use your hand to hold the pro-
peller when loosening or tightening the
propeller nut. Put a wood block
between the cavitation plate and the
propeller to prevent the propeller from
turning.
EML09010
Propeller checking Point
8 Check each of the propeller blades for
wear, erosion from cavitation or ventila-
tion, or other damage.
8 Check the splines for wear and damage.
8 Check for fish line winding around the
propeller shaft.
8 Check the propeller shaft oil seal for
damage.
EMU00976
Removing the Propeller
1) Straighten the cotter-pin 1 and pull it
out using a pair of pliers.
2) Remove the propeller nut 2, washer
3 and spacer 4.
3) Remove the propeller 5 and thrust
washer 6.
4-20
GB
removing
or

Advertisement

loading

This manual is also suitable for:

40x