Tilt Lock Mechanism; Tilt Support Knob; Tilt Support Bar; Top Cowling Lock Lever - Yamaha E40X Owner's Manual

q
EMD44110

TILT LOCK MECHANISM

(for Manual tilt model)
The tilt-lock mechanism is used to pre-
vent reverse thrust from the propeller lift-
ing the outboard motor when reversing.
q
To lock it, set the tilt-lock lever in the Lock
position. To release it, place the tilt-lock
lever in the Tilt position.
402073
1 Tilt-lock lever
EMD47010

TILT SUPPORT KNOB

Power trim/tilt model
To keep the outboard motor in the tilted-
up position, push the tilt support knob
under the swivel bracket.
403054
EMD48010

TILT SUPPORT BAR

Manual tilt model
The tilt support bar 1 keeps the outboard
motor in the tilted up position.
403062
EMD62011

TOP COWLING LOCK LEVER

To remove the engine top cowling, turn
the lock lever. Then lift off the cowling.
When replacing the cowling, check to be
sure it fits properly in the rubber seal.
Then lock the cowling again by moving
q
the lever upward.
001494
1 Top cowling lock lever
2-13
GB