Checking Propeller - Yamaha FT60B Owner's Manual

Maintenance
1
1. Trim and tilt rod
4. Check that the trim and tilt rod / the tilt
rod is free of corrosion or other flaws.
5. Tilt the outboard motor down. Check
that the trim and tilt rod / the tilt rod oper-
ates smoothly.
NOTE:
Consult your Yamaha dealer if any operation
is abnormal.
EMU29171

Checking propeller

EWM00321
WARNING
You could be seriously injured if the en-
gine accidentally starts when you are
near the propeller.
Before inspecting, removing, or install-
G
ing the propeller, remove the spark
plug caps from the spark plugs. Also,
place the shift control in neutral, turn
the main switch to "
move the key, and remove the lanyard
from the engine stop switch. Turn off
the battery cut-off switch if your boat
has one.
Do not use your hand to hold the pro-
G
peller when loosening or tightening the
propeller nut. Put a wood block be-
tween the anti-cavitation plate and the
propeller to prevent the propeller from
51
ZMU03662
Checkpoints
G
G
G
G
" (off) and re-
turning.
Check each of the propeller blades for
wear, erosion from cavitation or ventila-
tion, or other damage.
Check the propeller shaft for damage.
Check the splines / shear pin for wear or
damage.
Check for fish line tangled around the pro-
peller shaft.
ZMU03663
ZMU01897