Yamaha E40X Owner's Manual page 122

4) Remove the battery for Electric start
model. (Refer to "Disconnecting the
Battery")
5) Drain the cooling water completely
out of the motor.
Clean the body thoroughly.
6) Remove the spark plug(s).
7) Pour a teaspoonful of clean engine oil
into the cylinder(s).
8) Crank several time manually.
9) Replace the spark plug(s).
EMK24011
Fuel Tank
1) Drain the fuel from the tank for a long
period of storage.
2) Store the fuel tank in a dry, well-venti-
lated place, not in direct sunlight.
w
The fuel tank supplied with this engine is
its dedicated fuel reservoir and must not
be used as a fuel storage container.
Commercial users should conform to rel-
evant licensing or approval authority reg-
ulations.
EMK23212
Flushing Cooling System
cC
Do not run the engine without supplying
the cooling water. Either the engine
water pump will be damaged or the
engine will overheat and be damaged.
Before starting the engine, supply the
water to cooling water passage of the
motor.
4-5
GB