Table of Contents
Advertisement
4. Main Cam Gear Kit
A. Main Cam Gear is supplied as a Main Cam Gear Kit only (Kit No. VVGS0009).
Main Cam Gear Kit consists of a Main Cam Gear and a Main Cam Push Nut.
However, Main Cam Push Nut is available separately as a replacement part.
5. Installation of Main Cam Gear and Main Cam Push Nut
A. After installing the Support Angle, install the Main Cam Push Nut with
Needlenose Pliers etc. so that it is flush with the chassis.
There may be some slight scratches on the Shaft of Main Cam Gear, when
removing the Main Cam Gear. In case that the Main Cam Gear can be installed
securely without tottering, it is fine to use the one. If any tottering, install all
new parts.
Fig. J3-6
82
Advertisement
Table of Contents
