Table of Contents
Advertisement
V-LIN (EVR),
H-POS (EVR),
H WID (EVR),
V-SCR (EVR)
Specification :
Refer to descriptions below.
Input :
Video Input Jack,
Crosshatch Pattern Signal,
Monoscope Pattern Signal
Mode :
STOP
Equipment :
NTSC Video Pattern Generator
1. Supply a Crosshatch Pattern Signal to the Antenna Input Terminal.
2. Confirm that the Vertical Center Line is within the limits of A.
3. Select H PIN in EVR adjustment mode and adjust so that vertical lines should be
Fig. E13-1
158
Advertisement
Table of Contents
