Panasonic PV-DF2700-K Service Manual page 126

INPUT :
Antenna Input Terminal
MTS (ONLY L CH)
300 Hz±5 Hz
14 % or 7 % Modulating
Mode :
STEREO audio (TV)
Equipment :
Oscilloscope, MTS/SAP Signal Generator
1. Connect the RF OUTPUT of the MTS/SAP Signal Generator to the Antenna Input
Terminal.
2. Connect the Oscilloscope to TP9001 on the Audio C.B.A.
3. Set to TV mode, and then set to STEREO audio.
4. Adjust R9003 on the Audio C.B.A. so that the signal level is minimum.
5. Connect the Oscilloscope to TP9101 on the Audio C.B.A.
Fig. E3-1
126