7. Set the MTS/SAP Signal Generator as follows.
MTS (ONLY L CH)
300 Hz±5 Hz
14 % or 7 % Modulating
8. Connect the Oscilloscope to TP9101 on the Audio C.B.A.
9. Adjust R9101 (SEP (L) ) on the Audio C.B.A. so that the signal level of TP9101 is
minimum.
10. Set the MTS/SAP Signal Generator as follows.
MTS (ONLY L CH)
3 kHz±5 Hz
14 % or 7 % Modulating
11. Adjust R9108 (SEP (H) ) on the Audio C.B.A. so that the signal level of TP9101 is
minimum.
Fig. E2-1
Fig. E2-2
124