Table of Contents
Advertisement
panel on the unit together over 5 seconds again or press the POWER button OFF
to release EVR Adjustment mode. The Default value will be written to Memory IC
(IC6004).
5. Perform all EVR Adjustments. (Refer to
ADJUSTMENT WITH THE REMOTE
procedures.)
5.1.13. EVR (Electronic Variable Register) ADJUSTMENT WITH THE
REMOTE CONTROL
This unit has electronic technology using I
The following control functions are adjusted by using "On Screen Displays" and
the remote control instead of adjusting mechanical controls (VR).
Control functions which are indicated in EVR ADJUSTMENT MODE will be changed
on running change basis.Control functions are inter changeable for early products
and later products.
Note:
Write the original value to MEMO column before adjustment.
"EVR (Electronic Variable Register)
CONTROL" in ELECTRICAL ADJUSTMENT
2
C Bus concept.
39
Advertisement
Table of Contents
