Table of Contents
Advertisement
3. Press OPEN/CLOSE button to open the tray. Then, place the Firmware Disc on
the tray.
4. Close the tray. Updating will begin automatically as shown.
5. After approx. 1 minute, the tray will open automatically.
Note:
If the tray has still not opened after 3 minutes, updating was unsuccessful. In
this case, repeat above steps from step 1.
6. Remove the Firmware Disc from the tray. Then, turn off the power.
7. Turn on the Power. The tray will close automatically. Then, confirm that the
firmware version of DVD is changed to the number of the Firmware Disc.
5.1.4. USAGE SCREEN MODE
Function displayed on the TV monitor:
-
the total elapsed "Power on" time (in days)
-
the total elapsed "Cylinder rotation" time (in hours)
-
the total elapsed "DVD play" time (in hours).
1. With power turned and no cassette, press STOP/EJECT button on VCR and 7 key
on remote together.
The USAGE SCREEN will be displayed on the TV Monitor.
Fig. 3
Fig. 4
20
Advertisement
Table of Contents
