Table of Contents
Advertisement
After the Memory IC (IC6004) or Main C.B.A. is replaced, be sure to set the Default
value to Memory IC as shown in "Memory IC Reference Table" below.
1. Set the unit to TV/VCR Mode.
2. Press and hold STOP/EJECT, PLAY/REPEAT, and VOL- buttons of VCR operation
panel on the unit together over 5 seconds with no cassette inserted. The
adjustment overlay will appear to Enter EVR Adjustment mode.
3. Set the Default value of all Control functions using a remote control as shown in
"Memory IC Reference Table."
Note:
For Selecting Control functions and setting Default value, refer to
ENTER EVR ADJUSTMENT
4. Press and hold STOP/EJECT, PLAY/REPEAT, and VOL- buttons of VCR operation
Fig. 10-1
MODE" in ELECTRICAL ADJUSTMENT procedures.
Fig. 10-2
38
"HOW TO
Advertisement
Table of Contents
