Table of Contents
Advertisement
7. Item numbers with capital letter E (Example: E10, E20,...) in the Ref. No. column
are shown in the exploded views.
12.1.2. Mechanical Replacement Notes
1. Section No. of parts shown in Exploded Views are indicated in the Remarks
column.
2. Main Cam Gear is supplied as a Main Cam Gear Kit (Ref. No. 8) only. Main Cam
Gear Kit consists of a Main Cam Gear and a Main Cam Push Nut. However, Main
Cam Push Nut is available separately as a replacement part.
3. The Infrared Remote Control Unit (Ref. No. 123) replacement part is available as a
complete assembly unit only. Do not try to disassemble the Infrared Remote
Control Unit. However, the battery cover is available separately as a replacement
part.
4. Main Cam Push Nut (Ref. No. 414) is not reusable.
If removed, install a new one.
12.1.3. Electrical Replacement Notes
1. Unless otherwise specified;
All resistors are in
M = 1,000 k
.
All capacitors are in
All coils are in
2. Abbreviation
RTL: Retention Time Limited
This indicates that the retention time is limited for this item. After the
discontinuation of this item in production, it will no longer be available.
NR: Non Repairable Board Ass'y
MGF CHIP: Metal Glaze Film Chip
C CHIP: Ceramic Chip
COMPLX CMP: Complex Component
W FLMPRF: Wirewound Flameproof
C.B.A.: Circuit Board Assembly
P.C.B.: Printed Circuit Board
E.S.D.: Electrostatically Sensitive Devices
3. SERVICE OF CHIP PARTS
When servicing chip parts, please use a soldering iron of less than 30 W. Refer
, 1/4 W, carbon, K = 1,000
F, P =
F.
H, M = 1,000
H.
,
183
Advertisement
Table of Contents
