Playback A Tape - Panasonic PV-DF2700-K Service Manual

Playback a Tape

You can operate on the unit
2
Press PLAY/REPEAT.
1
Insert a cassette.
Press to stop and/or eject tape.
* Important: if a remote control button does not work when
pressed, press the
and try the button again.
Check list before you begin.
All connections are made. (See page 9.)
Your unit is plugged in.
1
Record tab
Note
To prevent tape jam
Inspect your cassette tapes and
remove any loose or peeling labels.
2
To Find a Particular Scene
Forward Search Press FF/SLOW+
(To release, press PLAY or FF)
Reverse Search
(To release, press PLAY or REW)
To view a Still (Freeze) picture
Press STILL/PAUSE
To view in Slow Motion
Press FF/SLOW+
(increases speed)
in the Still mode
(decreases speed)
To view Frame by Frame Advance
Press STILL/PAUSE in the Still mode
Notes
• After the unit is in Still or Slow mode for 3 minutes, it will switch to
Stop mode automatically to protect the tape and the video head.
• While main picture is TV mode, and VCR Playback in PIP mode,
FF, REW, PLAY, STOP, SEARCH, CM SKIP and STILL operation
is possible. During DVD playback on Main Picture, VCR cannot be
operated with remote control buttons. Please use unit buttons.
• Pressing PLAY in Stop mode starts playback on the main screen
only, not the PIP screen.
To stop Press STOP
To rewind tape Press FF/SLOW+ in Stop mode
To fast forward tape
To eject tape Press EJECT on the remote or
STOP/EJECT on the unit
Features for a Quality Picture
Digital Auto Tracking
Continuously analyzes the signal and adjusts for optimum picture quality.
Manual Tracking Control (PIP screen is not displayed)
Use during Playback and Slow Motion mode to reduce picture noise.
Press the 3 or 6 NUMBERED key on the remote control or
CH (TRACKING) on the unit until the picture clears up. To return
to Auto Tracking, press POWER off, then on again a few seconds later.
V-Lock Control (PIP screen is not displayed)
In Still mode, the 3 or 6 NUMBERED key on the remote control
or CH (TRACKING) on the unit operate as a V-Lock control
to reduce jitter.
Pure flat Picture Tube
This unit is equipped with Pure flat Picture Tube.
button on the remote
Insert a cassette.
• The unit power comes on
automatically.
Press PLAY.
• Playback begins if cassette
has no record tab (see page6.)
Press REW/SLOW-
(To release, press PLAY)
or REW/SLOW-
(To release, press PLAY)
(To release, press PLAY)
Press REW/SLOW- in Stop mode
17