Reviewing Variables In The Var Catalog; Clearing Variables - HP 32SII Owner's Manual

To cancel the VIEW display, press

Reviewing Variables in the VAR Catalog

The
where nnn.n is the number of bytes of available memory.
Pressing the {
Pressing the {
To review the values at any or all non–zero variables:
1. Press
2. Press
variable. (Note the
and
not indicate accuracy.)
To see all the significant digits of a number displayed in the {
press
the and
3. To copy a displayed variable from the catalog to the X–register, press
.
4. To clear a variable to zero, press
catalog.
5. Press to cancel the catalog.

Clearing Variables

Variables' values are retained by Continuous Memory until you replace there
or clear them. Clearing a variable stores a zero there; a value of zero takes
no memory.
To clear a single variable:
File name 32sii-Manual-E-0424
Printed Date : 2003/4/24
(memory) function provides information about memory:
} menu key displays the catalog of variables.
} menu key displays the catalog of programs.
{VAR}.
or
annunciator, indicating that the left–shifted
keys are active, If Fraction–display mode is active,
. (If it is a binary number with more than 12 digits, use
keys to see the rest.)
Size : 17 .7 x 25.2 cm
or once.
to move the list and display the desired
while it is displayed in the
Storing Data into Variables
does
} catalog,
3–3